How To Remove Back Panel Samsung Refrigerator

Is your Samsung refrigerator displaying an error code? Newer style Samsung refrigerators accept congenital in diagnostic systems. If your refrigerator finds, sees, or detects a fault or error in the organization, it will bear witness an mistake or fault code. The error code will display where the usual numbers are on the display screen. When an error code is displayed, your fridge is telling you a specific fault. If the error or mistake is non fixable by y'all, it volition require a repair technician. There are many different model numbers of Samsung refrigerators with digital displays and so if you see an error code write downwardly what is flashing or displaying. Don't pull the power from the fridge if information technology shows an error code. If you pull the power plug it will erase the fault code.

NOTE: If the icons on the display flash afterward you plug it in, don't worry, your Samsung refrig erator is simply going through a self check!
Refrigerator Display is Flashing Temperature:
If the temp in the fridge gets above the warmest temperature available that is set, the brandish blinks and a chiming noise will audio. When this happens make sure the fridge is not in cool off mode and the door hasn't been left open up for long periods of time. When the temp goes back downwardly to normal, the flashing and sound will stop.If the fridge stays in cool off mode: If your Samsung refrigerator is non cooling, information technology COULD be because information technology is in Demo Way. This mode is also called Exhibition Mode, Cooling Off Mode, or Exhibit Mode. This is a mode congenital into the Samsung refrigerator to display them in a showroom and so the lights work merely THE COMPRESSOR DOES Non therefore the refrigerator will not cool. You may accept purchased a "showroom model" Samsung fridge or yous may accept inadvertently put the fridge into this mode yourself. Either mode run across beneath for HOW TO GET THE FRIDGE OUT OF DEMO Fashion. NOTE: At that place is no data about Demo or Cooling off mode in y'all owner'south manual since this style is not for consumers. Some Samsung model refrigerators have a label fastened on the display therefore you would have an agreement of what Demo mode is. If demo or cooling off style is activated and the label is missing, y'all will non understand why the refrigerator will not absurd.

What happens when in demo mode:
1 – When door is open, internal Lights are on but the fridge is not cooling.
two – The refrigerator showroom store sets the refrigerator to Demo mode to salvage ability consumption.
3 – The consumer will not know about cooling or demo way and will notice that the fridge will non cool.
If your refrigerator is not cooling, it may exist in Demo Mode. Demo mode is a feature used by retailers to display the refrigerator without running the compressor. To see if your refrigerator is in Demo Mode: Blazon A models brandish "OF FF" if the refrigerator is in demo mode. Blazon B models have the icon on the display illuminated if the refrigerator is in demo style. Type C models display setting temperature if the refrigerator is in demo mode.

How To Remove Your Refrigerator from Demo Mode:
If your fridge is in Demo manner, press the 2 buttons together as shown in the images below in the red boxes for 3 seconds to resume normal operation.

Samsung refrigerator display panels – demo mode – what to press to deactivate
For the remainder of the Samsung refrigerator models, Delight notice the information tables below…

Samsung Refrigerator US & Other Countries – How To Become Out Of DEMO MODE

If the above charts practice non fix your issue, unplug & plug dorsum in power for a reset.

1. If y'all bought display model, make sure if it is on display mode when initial power on.
2. During Demo or Exhibition style… If both compartment sensors observe the room temperature higher than 65ºC, it volition cancel the exhibition mode automatically and render to freezing operation. In that location is no buzzer sound
past the temperature when cancel the exhibition style.

How to disable Cooling Off Mode For Samsung Family Hub Refrigerator

If your Samsung fridge displays O FF or OF OF, this means information technology has entered the absurd off or demo mode.

Samsung Refrigerator 1E, SE, or 5E Fault Reset

NOTE: During a ability outage your Samsung French Door refrigerator
may experience a brandish failure indicating 1 E, 1E, v E, 5E, SE, or IE
on the front end display. Only concord the POWER SAVE and LIGHTING
buttons (or Refrigerator and FREEZER) simultaneously for
about 5 to 6 seconds and the console will reset automatically.

Samsung Refrigerator Error? – Press both buttons aforementioned time to reset for eight seconds!
If you remove whatever Electronic Components:
If you remove the ice maker or change a lightbulb, the display will show an error code. If this happens, unplug the fridge and install the new part. Plug the fridge dorsum in and the mistake code volition clear itself.

Other mistake codes for a Samsung Refrigerator:

Display Panel Is Showing PC-ER:
If the brandish console shows PC-ER, make certain the wire harness under the top left door hinge is properly connected. Unplug the fridge and remove the top left swivel cover. Unhook the wire harness and reconnect it. Plug the fridge back in and if the fault code goes away then the issue is fixed. Come across illustrations below…

PC ER Fault CODE – SAMSUNG REFRIGERATOR
Display is 88 88 And Will Not Answer:
To ready this mistake code, unplug the refrigerator for i minute and then plug back in to articulate the fault code.
Mistake Code i Eastward:
Freezer Sensor error.
Error Code 2 E:
Freezer Sensor error.
Error Code 4 E:
Freezer Defrost Sensor mistake.
Mistake Lawmaking 5 E:
Fridge Defrost Sensor error.

Error Code six East:
Ambient Sensor error.
Error Lawmaking 8 Due east or 39 Due east:
Water ice Maker Sensor error.
Fault Code 21 East:
Freezer Fan error.
Error Code 22 Eastward:
Fridge Fan fault.
Error Code 23 E:
Condenser Fan error.
Error Code 24 E:
Freezer Defrost mistake.
Error Code 25 East:
Refrigerator Defrost fault.
Mistake Code 26 E or 39 E:
Ice Maker Function error.
Fault Code 83E, 85E, or 86E Mistake Codes:
These fault codes are related to voltage and current reception at the PBA Inverter. 83E specifically is acquired past abnormal current caused past things like a power outage. This error is temporary and can exist fixed by unplugging the unit of measurement for 1 minute and and then plugging it back in.

Samsung refrigerator mistake codes 1 through 13
See below for description of part that may be causing error lawmaking

Samsung Blinking Dash Line Error Code List

ane – Ice Maker Sensor – Ice Maker sensor connector missing
2 – Refrigerator Sensor – Refrigerator sensor connector missing
3 – Refrigerator Defrost Sensor – Refrigerator evaporator internal defrosting sensor connector missing
4 – Fridge Fan Error – Fridge Fan motor functioning failure
five – Ice Maker Function Error – Ice-ejector and level failed 3 times or more
6 – CoolSelect Zone Sensor – CoolSelect ZoneTM sensor connector missing
7 – Fridge Defrost Mistake – In the fridge room, if frost removal mode is finished due to limited time of lxxx minutes error is displayed
viii – Exit Sensor – Air sensor connector missing
9 – Freezer Sensor – Freezer sensor connector missing
x – Freezer Defrost Error – Freezer evaporator defrosting sensor connector missing
11 – Freezer Fan Error – Freezer Fan motor operation failure
12 – Condenser Fan Error – Condenser Fan motor operation failure
13 – Freezer Defrost Fault – In the freezer room, if frost removal style is finished due to express fourth dimension of 70 minutes error is displayed
Important Annotation: Any codes not listed above should be causeless your refrigerator is in DIAGNOSTIC MODE, DEMO Way, or LOAD MODE. These modes tell you or the repair person what is functioning properly on your fridge and what is not. Many people become into one of these modes past accident and cannot leave. To disable any of these modes, you can simply unplug your Samsung fridge for 30 seconds to 1 minute to clear. Meet below for the code numbers that may appear on your Samsung fridge display panel when in diagnostic, demo, or load mode.

Samsung fridge load mode – Used to check electric current status of all operational components.

Samsung Refrigerator How to enter into LOAD Fashion
Do the same thing as shown higher up to finish LOAD MODE or unplug fridge.

Samsung refrigerator load mode chart
Tells you lot electric current operational condition relating to the parts in your refrigerator.

Samsung Refrigerator Load Mode Bank check List (TEXT LIST)
(image above is the display for the LOAD MODE CODES below)

Display LED = R-1
Location = a Fresh Food Fan High speed

Display LED = R-one
Location = b Fresh Nutrient Fan Low speed

Display LED = R-1
Location = c Fresh Food Defrost Heater

Display LED = R-1
Location = d When 1st plugged in

Display LED = R-ane
Location = e Loftier Temp Condition Ambient Over 93F degrees

Display LED = R-1
Location = f Low Temp condition Ambient Under 72F degrees

Display LED = R-1
Location = due east – f Normal condition Ambience ( Betwixt 73F – 91F)

Display LED = R-1
Location = g Demo Mode

Display LED = F-ane
Location = a Compressor On

Brandish LED = F-1
Location = b Freezer Fan on loftier

Display LED = F-i
Location = c Freezer Fan on low

Brandish LED = F-1
Location = d Freezer Defrost Heater on

Brandish LED = F-one
Location = e Compressor Fan on high

Display LED = F-1
Location = f Compressor Fan on Low

Brandish LED = F-1
Location = m When the Sparkling water to dispenser valve operates

Display LED = R-x
Location = a Damper Open up

Display LED = R-10
Location = c Water ice Maker heater operates

Display LED = R-10
Location = d Full Water ice

Display LED = R-10
Location = e (Sensor detects) Sparkling Water tank full

Display LED = R-10
Location = f (Sensor detects) Sparkling Water tank depression

Display LED = R-10
Location = e – f (Sensor detects) Sparkling water tank empty

Display LED = F-10
Location = c Sparkling Water Dispenser valve operates

Brandish LED = F-10
Location = d Water ice Room Fan – High Speed

Brandish LED = F-10
Location = due east Water ice Room Fan – Low Speed

Display LED = F-x
Location = f H2o to Dispenser valve operates – Sparkling only

Display LED = F-x
Location = g French Heater Operates

Samsung Fridge Model Number Identification Nautical chart
HOW OLD IS MY Refrigerator?
WHICH Visitor BUILT MY REFRIGERATOR?
WHAT Month AND YEAR WAS MY REFRIGERATOR Made?
Find out Appliance Blazon, What country information technology was made in, What twelvemonth, and What month.